• 歡迎光臨南京傲藍機電科技有限公司官方網站!
    油質分析儀生產廠家
    油質分析儀 · 節能控制柜 · 濾油機 · 脫袍劑 · 油質檢測
    服務熱線 18191335909
    山東濾油機銷售_YYF-VIB型油質快速分析儀

    簡介—— YYF-VIB型油質快速分析儀YYF-VIB type rapid oil quality analyzerYYF系列油

    聯系電話:1819133590918191335909

    詳情內容/ Content details

    手機掃一掃

    YYF-VIB型油質快速分析儀

    YYF-VIB type rapid oil quality analyzer

    YYF系列油液質量快速分析儀產品概述

    潤滑油液質量檢測是企業“保護設備、節約能源”的一個重大問題,也是企業履行“節能減排、環境保護”的社會責任的一大難題。西安傲藍機電科技有限公司研發生產的YYF系列油液質量快速分析儀是典型的節能環保產品,可廣泛應用于:油田、石化、港口、運輸、礦山、機械、冶金、電力、紡織、科研、軍隊等行業和領域。只要有機械設備的地方,只要有潤滑管理的問題,YYF系列油液質量快速分析儀均能發揮其“按質換油、科學潤滑、保護設備、節約能源、延長設備使用壽命、降低企業生產成本、提高社會與經濟雙重效益”的核心科學價值。


    Product Overview of YYF series rapid oil quality analyzers

    Lubricant fluid quality testing is a major issue in lubrication management of the enterprise. It not only refers to "equipment protecting, energy conservation," but also for enterprises to fulfill their social responsibility as "energy saving, environmental protection," YYF series rapid oil quality analyzers which are produced by Xi'an AoLan Industrial instrumentation company are typical energy saving products. They can be widely used in: oil field, petrochemical, port, transport, mining, machinery, metallurgy, electric power, textiles, scientific research, military and other industries and fields. Wherever the machinery and equipment is, whatever the lubrication management issues are, YYF series oil quality analyzers can quickly play its core scientific value as "oil change according to the quality, scientific lubrication, protecting equipment, energy conservation, extending equipment life, reducing production costs, improving the social and economic benefit ".


    YYF-VIB型油液質量快速分析儀產品介紹

    YYF-VIB型油液質量快速分析儀其技術含量和應用功能在國內外處于領先地位,如采用了精確的程控測量技術,大大減輕了油液(介質)的電離程度,保證了測試精度;引入了隔離技術,易于準確標定靈敏度,提高檢測穩定性;溫度補償功能,自動調節適應環境溫度;水分檢測功能,可檢測油液中的水分含量;打印功能,可將檢測結果打印保存等。

    YYF-VIB型(智能型)油液質量快速分析儀除具有YYF-V型所具有的功能特點外,YYF-VIB型還具有打印系統、軟件系統、可充電電源系統,同時YYF-VIB型(智能型)油液質量快速分析儀應用模塊化設計思想,采用結構一體化設計構思,美觀大方,操作更方便。

    YYF-VIB型智能型油液質量快速檢測儀是YYF-VI型智能型油液質量快速檢測儀的升級產品。操作軟件由A級升到B級,使采樣速度提高2倍,抗干擾性能提升,測試精確性更高,同時傳感器選用“黑珍珠”,使得靈敏度更高,穩定性更好,耐腐蝕能力更強。


    The introduction of YYF-VIB type rapid oil quality analyzer

    YYF-VIB type oil quality fast analyzer with its technical benefits and application functionality is in a leading position at home and abroad, such as the use of programmable precision measurement technology, which greatly reducing the oil (medium) degree of ionization, to ensure test accuracy; the introduction of the isolation techniques for easy and accurate calibration of sensitivity and improving detection stability; temperature compensation function, which has automatic adjustment to the ambient temperature; the moisture detection can detect the moisture content in oil; printing function can print test results and make data saved and so on.

    Besides the features YYF-V has, YYF-VIB type also has a printing system, software system, rechargeable power system. And YYF-VIB type (intelligent) oil quality analyzer applies fast modular design, using a structure integrated design concept, elegant and easy operation.

    YYF-VIB type (intelligent) oil quality fast detector is YYF-VI based detector but upgraded. The software is upgraded from A-level to B, the sampling rate increased 2 times, having anti-jamming performance, higher test accuracy, and the sensor using the "black Pearl", making the higher sensitivity, better stability, corrosion-resistant.


    主要檢測項目

    ? 潤滑油液的綜合污染度

    ? 潤滑油液中的水分含量

    ? 大于65μm的金屬磨屑

    ? 輕質油對潤滑油液的影響


    The main projects are detected as follows

    ? Comprehensive pollution degree of lubricate oil

    ? Moisture content of lubricate oil

    ? Metal abrasive dust which >65μm

    ? The influence of light oil on lubricate oil


    主要檢測程序

    主要檢測程序

    The main programs are detected as follows

    Inspect the connections—power on—it will be self-inspection when it is on electricity—wiping the sensing instrument—drip into the clean oil—click the zero keyboard—drop the dirty oil into the right sensor—type oil number of the dirty oil—click the keyboard of test—click the keyboard of detecting water—type the detecting result—close the instrument


    主要技術指標

    ? 測試范圍:±100.0數位

    ? 環境溫度:-20℃—+50℃

    ? 重復性誤差:絕對均值≤︱±3%︱

    ? 整機功耗:≤8W

    ? 電源:交流電:市電~220V/50HZ;直流電:9V可充電鎳氫電池


    The main technology index

    ? Test range:±100.0

    ? Environment temperature: -20℃—+50℃

    ? Repeatability errors: mean absolute≤︱±3%︱

    ? The power consumption: ≤8W

    ? Power: alternative current: city power: 200v; direct current: chargeable power: 9v


    尺寸及重量

    ? 尺寸(長×寬×高):350mm×245mm×165mm

    ? 重量:≤4.5kg

    Dimension and weight

    ? Dimension :( length×wide×height):350mm×245mm×165mm

    ? Weight: ≤4.5kg


    功能和優點

    ? 自檢功能:每次開機時儀器先自檢,檢測儀器工作是否正常;

    ? 可檢測目前油品市場上上千種潤滑油的污染度;

    ? 可檢測無油液編號的任何一種潤滑油;

    ? 可檢測新購油品的污染度,初判新購油品的好壞;

    ? 可檢測油品中的水分含量,檢測完畢時有音響提示;

    ? 檢測結果除顯示數據外,能自動將潤滑油液質量分為:報廢、堪用、良好三種不同污染類型,并有對應指示燈指示;

    ? 配有打印系統,可打印檢測結果;

    ? 三種顯示測試結果方式:液晶讀數、指示燈指示、打印保存;

    ? 具有監視、警示誤操作功能:如果操作錯誤,儀器會發出警示聲,應重新操作;

    ? 采用單片機技術;

    ? 采用軍品級及工業級元器件,提高整機精度、穩定性和可靠性;

    ? 存儲有300余種油品的報廢參考值可供查詢;

    ? 供電方式:交、直流兩用,有無市電情況下均可工作,方便野外現場工作;

    ? 增加可充電電源系統,方便用戶反復使用;

    ? 容易調零,檢測時無須精確調零,具有“O”點誤差自動清除功能;

    ? 操作簡便,測試速度快,全中文標識,適于各層次人員使用;

    ? 結構一體化,美觀大方、耐用便攜、使用更方便;


    Functions and advantages

    ? Self-inspection functions: every time the instrument can detect whether its operation is normal or not by itself;

    ? It can detect the pollution degree of thousands lubricate oil on the market at present;

    ? It can detect any oil which hasn’t the oil number;

    ? It can detect the pollution degree of new oil, and can have the first judge about the quality;

    ? It can detect the moisture content of lubricate oil. It will have the indication sound when it is finished;

    ? The detecting result, besides showing the data, it can sort the pollution degree into three different types: scrapped, useable, good. And it has the correspondent indicator to indicate;

    ? Equipped with type system, the detecting result can be printed;

    ? There are three different methods of showing the results: LCD reading, indicator to indicate, save the data by printing;

    ? It has the functions of surveillance and warning to the error operation: if the operation is wrong, it will have the indicator to warn you to do it again;

    ? Adopting the SCM technology;

    ? Applying military level and industrial level components and improving the reliability and stability;

    ? Dealing more than 300 models of oil about the scrap value to refer;

    ? The methods of offering power: alternative current and direct current;

    ? Increasing the chargeable power system that is convenient for users to use repeatedly;

    ? Easy to change to zero, and has the function of eliminating the zero error;

    ? Easy to operate, fast speed, all language is Chinese and English, suitable for every level;

    ? Integration design on structure, the appearance is beautiful, portable and the operation is more convenient;


    技術創新點

    ? 首創雙路傳感、溫度自動補償,提高了儀表的穩定性;

    ? 傳感器芯片采用鎳金合金制作,抗磨抗腐蝕能力強;

    ? 傳感器芯片的基板采用聚四氟乙烯新材料,大大提高了絕緣電阻,有利地提高儀器的靈敏度;

    ? 采用程控電路技術,大大縮小樣油(介質)電離誤差,提高了測試精度;

    ? 引入隔離電路技術,使調“0”與調“靈敏度”互不干擾,易于準確標定靈敏度,提高儀器的測試穩定性;

    ? 設置了強化的抗干擾電路,提高了抗干擾性能,使測試數據準確可靠;

    ? 選用高精度低漂移的元器件(軍品級及工業級);


    Technological innovation points

    ? It firstly adopts dual sensors and automatic temperature compensation which could improve the stability of the instrument;

    ? The sensor chip using nickel-gold alloy which has strong corrosion resistance;

    ? The base board of sensor chip adopts the new material of PTFE , greatly improving the insulation resistance, enabling to improve the sensitivity of the instrument;

    ? It uses program-controlled circuit technology, greatly reducing the sample oil (medium) ionization errors so as to improve test accuracy;

    ? The introduction of isolation circuit technology in which the adjustment to "0" and the adjustment of "sensitivity" without disturbing each other and makes easy and accurate calibration of sensitivity and improve the stability of the test;

    ? It sets the enhanced anti-jamming circuit and improves anti-jamming performance so as to make accurate and reliable test data;

    ? It uses high-precision low-drift components (military grade and industrial grade);


    操作方法

    1 首先將儀器放置水平,打開機箱;

    2 從箱內取出電源連接線,將一端插入儀器面板左上角的“市電輸入”插座內,將另一端插入220V市電(注:若“選擇開關”選擇“電池” 供電方式,則此步可以省略。);

    3 將“市電開關”置于“開”的位置,“市電開關”內紅色指示燈亮,表示市電接通,“充電指示燈”發紅光或綠光。若“充電指示燈”發紅光表示電池處于充電狀態,必須將“選擇開關”置于“市電”工作,以便儀器既可進行正常檢測,又可同時給電池充電;若“充電指示燈”發綠光表示電池電量飽滿,“選擇開關”置于“電池”或“市電”工作均可(注:若“選擇開關”選擇“電池”供電方式,則“市電開關”應置于“關”的位置。);

    4 “選擇開關”置于“市電”或“電池”工作時,紅色“工作指示燈”亮,儀器都先進行系統自檢:首先顯示“負號”和“小數點”,然后有一個“8”字自左向右掃描,隨后液晶屏顯示“000.0”,表示系統自檢完畢;

    5 給左右兩個傳感器滴入石油醚,用脫脂棉擦拭干凈;

    6 傳感器擦拭干凈后,向兩個傳感器分別滴入同型號等量的干凈油液,待油液完全布滿傳感器底部時,點擊“讀零”鍵,若只發出一次短促警示音,液晶屏顯示“000.0”,則表示傳感器電路不平衡度符合規定值,調零完畢;若發出連續短促警示音,調節“調零”旋鈕至警示音消失,再連續點擊“讀零”鍵2-3次,確保液晶屏顯示“000.0”,調零完畢(注:操作過程中,如出現關機、斷電等情況,必須重新加入干凈油液調零);

    7 將右傳感器內的干凈油液用石油醚擦拭干凈,然后注入同型號等量被測油液;

    8 用鍵盤輸入被測油液的編號(三位數)。若發現輸入號有錯,點擊“清除”鍵,重新輸入編號。若用戶要檢測的油液在分類表中沒有,可采用十大類油液中的公用通道編號(每大類的類別號后加“00”),如:液壓油類別號為“0”,后加“00”,即輸入編號“000”;柴油機油類別號為“2”,后加“00”,即輸入編號“200”;導軌油類別號為“9”,后加“00”,即輸入編號“900”……依次類推,進行檢測;

    9 若要檢測油液的綜合污染度執行9.1;若要檢測油液中的水分含量執行9.2;若既要檢測油液的綜合污染度又要檢測油液中的水分含量,則先執行9.1,然后重新輸入被測油液編號,再執行9.2;

    9.1 點擊“確認”鍵,儀器進入檢測程序,顯示檢測數據和油質的等級;“1”表示良好,同時油質指示燈綠燈亮;“2”表示堪用,同時油質指示燈黃燈亮;“3”表示報廢;同時油質指示燈紅燈亮;

    9.2 點擊“測水”鍵,儀器對被測油液測試2分鐘后顯示檢測結果,并發出三聲警示音,表示測試完畢;

    10 打?。喝粢蛴z測結果,應將日期輸入。如2006年3月24日,輸入年的二位數“06”,點擊一次“日期”鍵;然后輸入月的二位數“03”,再點擊一次“日期”鍵;較后輸入日的二位數“24”,再點擊一次“日期”鍵;接著點擊“打印”鍵,打印出檢測結果;

    11 用石油醚擦干凈傳感器,以備下次使用;

    12 關機:測試完畢將“選擇開關”置于水平(“關”的位置),整機斷電,紅色“工作指示燈”熄滅。此時若“充電指示燈”為綠色,即可將“市電開關”斷開(“關”的位置),拔掉電源線并收藏;若“充電指示燈”為紅色,說明電池還在充電,則“市電開關”不應關斷;若急需關機,下次使用時必須在有市電的場合工作;

    13 較后,合上機箱,收好儀器,以備再用。


    Methods of operation

    1 First, place the instrument level, open the case.

    2 Take out the power cable from the box, insert the end to the instrument panel top left corner of the "AC input" socket, the other end into the 220V mains (Note: If the "selection switch" to select "battery" power supply, this step can be omitted.

    3 The "electricity switch" should be placed "on" position, for the "electricity switch" the red light on, it means electricity connected, "charge indicator" of red or green. If the "charge indicator" glows red to indicate the battery in the state of charge, must put the "selector switch" to "electricity", and so the instrument can do normal inspection, as well at the same time charging the battery; if "charging indicator light" is green, it means the battery is full, then "selector switch" at the both "cell" or "electricity" can work (Note: If the "selector switch" Select "battery" power supply, the "electricity switch" should be placed in the "off" position.);

    4 When the "Selector switch" at the "mains" or "battery", the red light on, firstly, the instrument is doing self-test: First show "negative" and the "decimal point", then there is a "8" word from left to right scanning, then the LCD screen shows "000.0", said the system self-test is completed.

    5 Drop petroleum ether into the two sensors, wipe clean them with cotton wool;

    6 Wipe clean the sensor, drop into the two sensors with the same model and same amount of clean oil until the oil completely covers the sensor bottom, click " zero" key, if it is only giving a short warning sound, LCD screen displays "000.0 ", it means sensor circuit imbalance is within the compliance value, zero is completed; if short warning tone issues continuously, adjust the" zero "knob until the warning sounds disappear, and then click on the" read zero "button 2-3 times to ensure LCD screen shows "000.0", zero is completed (Note: during the operation, such as shutdowns, power outages, etc., must refill with clean oil and do zero adjustment);

    7 Wipe the clean oil with petroleum ether in the right sensor and then drop into the same type and same amount of the measured oil.

    8 Input the oil number of the measured oil on the keyboard(three digits). If you input wrong number, click the "Clear" button, re-enter the number. If the user's oil does not list in the classification, the oil can be used in ten categories of public channel number (add "00"to each type of category, ), such as: hydraulic oil category number "0", added, "00", that is, the input number "000"; diesel engine oil category number is "2", add "00", that is, the input number "200"; rail oil category number "9", after the plus "00", that is, the input number "900" ... and so on, and be detected.

    9 To test the comprehensive pollution degree is to implement 9.1, to test the water content of oil is to implement 9.2, if to test both, then first implement 9.1 and then 9.2.

    9.1 Click "OK" button, the instrument into the testing procedures, test data shows the level of oil; "1" means good, while oil green light on; "2" means worthy of use, while oil yellow light on; "3, "scrapped; while red light on;

    9.2 Click on the "water test" button, after 2 minutes the instrument shows the oil test results, and issues three times of a warning tone, indicating that the test is completed;

    10 Print: To print test results, the date should be entered. Such as the March 24, 2006, enter the years of double-digit "06", click on a "date" key; then enter the two digit month, "03", then click on a "date" button; the last day of the two input number "24", then click a "date" button; then click on "Print" button, print out the test results.

    11 Wipe the sensors with petroleum ether and prepare for the next use.

    12 Shutdown: Test completed the "selector switch" at the level ("off" position), the whole power off, red light off. At this point if the "charge indicator" is green, you can put "electricity switch" off ("off" position), unplug the power cord and collect; if the "charge indicator" is red, the battery is still charging, the "electricity switch" should not be turned off; if need shut down, next time you must work with electricity in the occasion.

    13 Last, close the box and put it well and prepare for the next use.


    檢測結果的顯示

    儀器進入油液檢測程序后,顯示屏首先顯示油液污染程度的數值(如帶有負號為負值),該數值停留約三秒鐘后消失,然后顯示檢測結果:顯示屏左端顯示油液編號;右端顯示被檢油樣的三種可能的檢測結果:良好、堪用、報廢。

    顯示“1”(同時面板上綠燈亮)—— 表示油品良好,設備正常;

    顯示“2”(同時面板上黃燈亮)—— 表示油品堪用,表明油品還能用,但要注意縮短跟蹤時間,檢測周期;

    顯示“3”(同時面板上紅燈亮)—— 表示油品報廢,表明油品污染不能使用。這時檢測人可再對該油液檢測兩次,參考《污染類型表》,則可判斷油液是正常變質還是非正常污染。

    污染類型表

    污染類型表


    1. 第一類污染:檢測三次后,結果均超過報廢數值,且數值穩定正偏,則表明該油品屬于正常污染,因油品使用過程中會出現粘度、閃點、酸值、堿值、雜質等指標的變化,這些指標的變化由綜合污染度表現出來。

    2. 第二類污染:檢測三次后,結果是不斷正向漂移(正向增大),且已超過報廢數值,則表明該油品屬非正常污染。此類結果表明:油品中有水分或金屬磨粒。

    3. 第三類污染:檢測三次后,結果均是穩定負值,則表明該油品屬于非正常污染。此類結果表明:油品中有輕質油(汽油、柴油)存在。


    Test results show

    When the instrument into the oil testing procedures, the display first shows the value of oil pollution (such as with a negative sign is negative), the value stays and disappear after three seconds, then displays the test results: the left display shows oil number; right reveals that the seizure of three possible oil sample test results: good, worthy of use, and scrapped.

    Display "1" (green light on the same panel) —— that oil good and equipment proper;

    Display "2" (yellow light on the same panel) —— that worthy use of oil, that oil still usable, but pay attention to shorten the track time and testing cycle;

    Display "3" (while the red light on the panel) —— that oil scrapped, shows that oil is polluted and can not be used. Then test may be done twice, refer to < pollution type table >, and then determine the deterioration of oil is normal or abnormal pollution.

    Pollution type table

    污染類型表


    1. The first type of pollution: testing three times, the results are more than scrap value, and that is Stable positive bias, then that is a normal oil pollution, oil use for the course will appear viscosity, flash point, acid, alkali value, impurities and other indicators of change, changes in these indicators shown by a combination of pollution.

    2. The second type of pollution: testing three times, the result is a constantly positive drift (positive increase), and has more than scrap values, indicates that the oil is a non-normal pollution. Such results show that: the oil has water or metal debris.

    3. The third type of pollution: testing three times, the results are stable negative, indicating that the oil is non-normal pollution. Such results show that: there is light oil (gasoline, diesel) in the oil.


    使用注意事項

    ? 測試時,儀器放平,切勿振動,保證測試精度。

    ? 清潔油腔時,不能用硬物碰撞底部,以免損壞傳感器。

    ? 通常情況下,不用丙酮擦拭油腔。

    ? 該儀器請勿在雨、雪、霧及易燃、易爆、強磁、強電等環境中使用。

    ? 面板上的紅色帖膜○﹗,且勿打開,以免損壞儀器。

    ? 本儀器可交、直流兩用,用戶可根據實際情況選用。

    ? 機內電池為鎳氫可充電電池,更換時必須用鎳氫可充電電池,若更換有困難,請寄本公司維修。

    ? 檢測結束后,一定要關掉主機電源開關,拔掉插入主機的外接電源插頭,防止主機內電池跑電。

    ? 儀器在較長時間內(通常為一個月內)不使用,應在交流電情況下給電池充電4至5小時,以防止電池因自放電導致電壓過低,損壞電池。


    Caution

    ? When test, the instrument should be placed flat, there must be no vibration so as to ensure test accuracy.

    ? When cleaning the sensor, please don't touch the bottom with hard objects, collision damage to the sensor should be avoided.

    ? In general, do not use acetone to wipe the oil chamber.

    ? Don't use the instrument in rain, snow, fog and flammable, explosive, strong electrical, magnetic work environment.

    ? Don't open the Red membrane○﹗on the panel, so as to avoid damage to the instrument.

    ? AC or DC, can be chosen in real situation.

    ? Ni-MH batteries inside, are rechargeable battery, replacement must use Ni-MH rechargeable battery, replace if difficult, please send us and repair.

    ? After the test, be sure to turn off the main power switch, unplug the power cord with the host's external, to prevent internal battery to run power.

    ? If instrument over an extended period (usually one month) is not used, should be in the AC to charge the battery 4-5 hours, in order to prevent the battery voltage is too low due to self-discharge and leading to damage the battery.


    常見故障及其排除

    ? 當儀器空載(沒有加油)無法調零時,說明油腔底部溝道中有金屬物將傳感器短路,只要用石油醚認真擦洗即可排除。

    ? 當兩個油腔加入新油后無法完成調零時,即左右偏差遠遠超出傳感器電路不平衡度(B)的規定值,說明油中所含金屬磨粒已將傳感器短路,若左偏負值很大,則擦凈左邊的油液,重新加入新油完成調零設置,反之亦然。

    ? 若測試臟油時,污染度指標很高(超過報廢參考值幾倍以上),說明臟油中所含金屬磨粒已將傳感器短路,此時應擦掉臟油重新加入臟油測試。

    ? 油液報廢參考指標詳見“部分潤滑油品報廢參考值”表。

    ? 儀器空載時,若“選擇開關”選擇“電池” 供電方式,讀數不斷變小,說明電池低效,可考慮充電或更換電池,有困難時,請與本公司聯系。


    Common faults and exclusion

    ? When the instrument is empty using (no fuel) and can not be adjusted to zero, maybe metal debris in oil caused short-circuit on the sensor, using petroleum ether to carefully scrub, it will be OK.

    ? When the two oil chambers can not be adjusted to zero after the addition of new oil, that is so far beyond the deviation of the sensor circuit unbalance (B) of the specified value, indicating that the metal debris caused sensor short circuit, if the reading is negative and towards left and significant, then wipe the left side oil chamber, add new oil to complete re-set to zero, and vice versa.

    ? When test of dirty oil, the pollution index is high (more than several times over the scrapped reference value), indicating that dirty metal debris in the oil has caused sensor short circuit, you should wipe off the dirty oil to re-drop dirty oil to test.

    ? Waste oil reference see "part of the oil products scrapped reference" table.

    ? Instrument loading, if the "selection switch" to select "battery" power supply, the reading keeping smaller, it means the battery is inefficient, consider charging or replacing batteries, there are difficulties, please contact us.


    特別聲明

    本資料盡可能做到全面、詳實,若資料內信息有與實物不符,以實物為準。傲藍公司對資料內信息保留修改而不另行通知的權利。

    未經本公司之明確批準,任何機構或個人不得擅自使用或更改西安傲藍公司著作產權之任何部分或全部,違者,將被追究法律責任。


    Special Statement

    This file is as comprehensive, detailed as possible, if the inside information does not match with the real product, it to prevail in kind. Xi'an Aolan Comapny has the right to retain the data changes without prior notice.

    Without the permission of the Company, any organization or individual shall not use or change the ownership or any part of Xi'an Aolan Company, all offenders will be held liable.

    在線留言

    message
    掃一掃更精彩掃一掃更精彩
    • 聯系人:胡先生
    • 聯系電話:18191335909
    • 座機:025-83228545
    • 400電話:18191335909
    • 郵箱:hu_sunrising@163.com
    • 地址:江蘇省南京市棲霞區邁皋橋街道邁堯路18號左右陽光3層
    在線客服

    如果您對此產品感興趣! 請直接聯系南京傲藍機電科技有限公司!

    相關推薦

    HOT RECOMMEND

    快速通道 Express Lane

    咨詢熱線

    1819133590918191335909

    郵箱:hu_sunrising@163.com

    QQ:2361860834

    版權所有:南京傲藍機電科技有限公司

      備案號:蘇ICP備18024670號-1
    網站地圖   RSS    XML
    地址:江蘇省南京市棲霞區邁皋橋街道邁堯路18號左右陽光3層  聯系人:胡先生  電話:18191335909   郵箱:hu_sunrising@163.com   
    技術支持:動力無限 萬家燈火  
    南京傲藍機電科技有限公司主要銷售山東油質分析儀,山東節能控制柜,山東濾油機,山東脫袍劑等產品,歡迎前來咨詢!
    • 掃一掃進入手機站掃一掃進入手機站
    四不像 正版 期期准